Store Hours

Mon - Fri: 9:00 -17:30

Location

8 Heald Rd. Ingleburn, NSW 2565
7 Darnick St. Underwood QLD 4119
37 Barrie Rd. Tullamarine, VIC 3043
27 Rhur St. Dandenong Sth, VIC 3175

Silo Level and Weighing

Whether you require a precision weighing system or a basic indication of tank level, we can engineer a solution from components we carry on the shelf.

Enquiry Form

We will get in touch with you shortly

  • Our ‘SILO’ series of weatherproof load cells are manufactured in Australia using reliable strain gauge technology to provide sensors of world standard which not only meet, but exceed the specifications of your requirements.
  • Our self check load cell housings include a top and bottom flange plate allowing ease of installation to existing or new silos. The mounts are fully equipped to provide protection against wind shear, under load and overload conditions. The mounts are certified as complying with the structural steel standards.
  • Our instrumentation is Australian made and supported, providing you peace-of-mind that parts are readily available and that your instrumentation is servicable now and into the future.
  • We offer a complete range with essential features like full digital calibration, high level alarms and weatherproof housings. Our optional add-ons include low cost remote displays, modem access solutions and our own software monitoring package.
  • We manufacture under a quality system to ensure quality products, and guarantee reliability and performance not just in our test rigs but once installed under your silos.
  • AWE will handle your project from concept to completion. Our expert team of tradesmen, technicians and engineers are capable of completing all necessary tasks to get your job done right. Not only that, our technicians are on call 24/7 to offer maintenance and support when you need it after the installation is complete.

LEVEL WEIGHING VS PRECISION WEIGHING

LEVEL WEIGHING applications include purchasing against silo levels, silo empty discharge control and silo full alarms. This configuration achieves an accuracy of ±1-2% and resolutions of 1 part in 500. A single load cell assembly is installed under one silo leg or support.
PRECISION WEIGHING applications include loss in weight batching systems, inventory and check weighing of supplied product. We can achieve an accuracy of ±0.1% and resolve weights to 1 part in 3000. A load cell assembly is installed under each support or leg of the silo.
Note: Some systems may be non-linear within the bottom 5% of the silo. Good results are achieved by calibrating outside of this area of the silo.

WHY LOAD CELL WEIGHING SYSTEMS ARE THE RIGHT CHOICE

HIGHER ACCURACY

Measures overall weight of tank or silo contents, eliminating issues other weighing methods encounter due to product consistency variation.

MORE RELIABLE

Load cells are not influenced by tank or silo geometry, material density, or moisture and dust within the vessel.

EASIER TO MAINTAIN

There are no moving parts, and the weighing system is mounted externally which eliminates the need for workers to enter the silo to carry out maintenance which is dangerous and can cause costly shutdowns.

QUICKER AND EASIER CALIBRATION

Can be calibrated using our pull-down lug system, avoiding the need to use a large quantity of test weights.

MORE VERSATILE

Weighing the overall contents of a silo or tank means that you don’t need to recalibrate your weighing system for different products.

BETTER LONG-TERM INVESTMENT

The long-term benefits of accuracy, maintenance and add-on options will provide more efficiency for your business, which will generate a better Return on Investment (ROI).

EFFICIENT INVENTORY MANAGEMENT

Can be linked to our “Weighterm” software allowing you to manage your tank levels and establish setpoints to automatically order stock.

SILO ACCURACIES

TYPE 1, ONE LOAD CELL, 3 STOOLS, ±2%

This system is accurate to within ±600kg on a 30 Tonne Silo installation. Instrument Calibration is 30t x 0.1t.

TYPE 2, TWO LOAD CELL, 2 STOOLS, ±2%

Although this has the same accuracy as Type 1, it is more reliable in time because it is less affected by load sharing between feet and changing loading patterns in the Silo. (This is our usual offer for virtually maintenance free level indication.)

TYPE 3, FOUR LOAD CELLS, ±0.1%

This system has an accuracy of ±30kg. Instrument Calibration is 30t x 0.01kg.

These accuracies are guaranteed. Our Silo Series Load cells are unique to the industry because they carry structurally certified design without de-ration of the load cell.

SPECIFICATIONS

Environmental Temp -10 to 40°C compensated temperature range. -20 to 60°C working
IP Rating IP65 load cells & instruments. (Hose proof)
Electrical Supply 240v , 50Hz AC. (other to order)
Power Power 10 VA Maximum
Mechanical Overload The load cell assembly is constrained against side loads. Vertical freedom is also mechanically limited against uplift & overload.
Material Mild steel, (also available as stainless steel 304 or 316)
Finish Galv plated. (also available as painted finish)

Load cell: Complete assembly with constrainers. Specify accuracy required & silo capacity in tonnes.
Dummy/spacer: Used on legs without the load cell constrainer. Zinc plated quality finish. Dimensions are the same as load cell assembly.

InstrumentsSilomaster-
Model: WT
 
Display5 digit12mm LED style
Setpoint output (high or low level)xRELAY (240V,2A)
Second setpoint outputoptionRELAY (240V,2A)
Weatherproof housingxIP65 rated
Analog output
(4-20mA)
xTelemetrics compatible
Digital output (RS232 or RS485)xWeighterm or remote display
Use RS485 option
Connection for remote displayx

Note 1: you may select either analogue or serial output but not both.
Instruments shipped with analogue output as standard.
These instruments are the most requested. Please discuss any special requirement with our application engineer.

 

Remote Access: We have solutions available for remote displays and computer monitoring.
Supplier Access: A modem may be installed to allow phone access to silo weights.
Install & calibrate: Turnkey installation/calibration package.

Silo Level and Weighing

Whether You Need A Precision Weighing System Or A Basic Indication Of Tank Level, We Can Engineer A Solution To Fit Your Budget

Enquiry Form

We will get in touch with you shortly

Get Accurate Tracking Of Your Product Inventory.

Product levels in silos are a challenge to monitor due to the cone design that prevents product bridging which is why you need a Silo Leveling System to help you with accurate tracking of product inventory. As your product flows down the silo, our silo level & weighing system monitors and measures the product resulting in greater accuracy in inventory control and management.

Whether your requirement is for a precision weighing system or a basic indication of tank level, we can engineer a solution from components we carry on the shelf.

  • Foot print fits most silos
  • Special footprints made
  • Zinc plated finish
  • Loadcells standardized
  • Weatherproof (IP65)
  • Guaranteed Accuracy
  • Constrained Assembly
  • Compact instruments
  • Full digital calibration
  • Overload setpoint

We manufacture under an ISO 9002 system to ensure a quality product.

World Class Load Cells

 

Our ‘SILO’ series of weatherproof load cells are manufactured in Australia using reliable strain gauge technology to provide sensors of world standard. Our self check load cell housings include a top and bottom angle plate allowing ease of installation to existing or new silos. The mounts are fully equipped to provide protection against wind shear, under load and overload conditions. The mounts are certified as complying with the structural steel standards.

 

Top to Bottom – Top Quality

 

Our instrumentation are Australian made.

 

Plus, we offer a complete range with essential features like full digital calibration, high level alarms and weatherproof housings.

 

Our optional add-ons include low cost remote displays, modem access solution and our own software monitoring package.

 

Accuracy and Reliability

 

Precision Weighing applications include loss in weight batching systems, inventory and check weighing of supplied product. We can achieve accuracy’s of 0.1% and resolve weights to 1 part in 3000. A load cell assembly is installed under each support or leg of the silo.

 

Level Weighing applications include purchasing against silo levels, silo empty discharge control and silo full alarms. This configuration achieves accuracy’s of 1 to 2% and resolutions of 1 part in 500. A single load cell assembly is installed under one silo leg or support.

Silo Footprints Dimensions