Phone Number

1300 044 044

Store Hours

Mon - Fri: 9:00 -17:30

Location

8 Heald Rd. Ingleburn, NSW 2565
7 Darnick St. Underwood QLD 4119
37 Barrie Rd. Tullamarine, VIC 3043
27 Rhur St. Dandenong Sth, VIC 3175

AWE100P Load Cell Controller

Stand-Alone Control/Interface for PLC Applications. Ideal Solution For Tank & Silo Management.

Enquiry Form

We will get in touch with you shortly

The Ideal Controller For High-Speed, High Accuracy Weighing and Level Measurement Operations.

Key Features:

  • Offset and span trim calibration functions allow calibration without the application of test masses
  • Suited for tank and silo applications
  • Relay, serial and analog output options make it valuable for stand-alone control or as an interface for PC, PLC & HMI applications
  • Industrial hardened and ideal as a weighing controller in packaging machines and batch controllers
  • Intuitive scrolling text menus guide you step by step through the effortless setup and calibration process
  • The world’s most user-friendly and versatile load cell controller
  • Easy-to-use front panel configuration
Input 4/6-wire strain gauge 1-5mV/V
Power supply HV – 85-265VAC / 95-370VDC LV – 15-48VAC / 10-72VDC
Relay outputs (Optional) 4 x 5A form A relays (250V rated)
Analog output (Optional) Isolated 16-bit 4-20mA / 0-10V 7Hz output (fully scalable). Windows programmable over any range within the full-scale range of the controller
Serial port (Optional) Isolated option 2 or option 4 serial port » Modes: ASCII, Modbus/RTU slave, Ranger A » Data ranges: 300-38400 » Parity: Odd, even or none
Excitation 5VDC excitation supplied (powers up to 8 x 350Ω load cells)
Sampling rate Up to 50Hz
Resolution 18-bit
Accuracy 0.005% of reading
Temperature drift Typically 3ppm/°C
Calibration Pre-calibrated for 0-10,000 counts (2mV/V sensor gain at full scale). Can be recalibrated using the auto (apply mass) or mV/V method. Adjustable zero offset and span
Easy setup Intuitive text prompts facilitate easy setup
Security Calibration and setpoint functions have independent security code access. Direct access to setpoint activation values is independently configurable
Inputs Hold, lock, tare, batch, zero, peak hold and print remote commands
Display 6-digit, 14-segment LED alphanumeric
LEDs 4 x setpoint, 1 x NET
Buttons 5 buttons: program, up, down and 2 menu buttons
Dimensions 48 x 96 x 119.5mm (H x W x D)
Panel cutout 45.5 x 92.5mm

ORDER CODES

Code Description
AWE100 AWE Series
P Panel mount
-LV 15-48VAC / 10-72VDC power supply
-HV 85-265VAC / 95-370VDC power supply
-R Relay outputs (2) form A
-2 RS232 isolated output
-4 RS485 isolated output
-A Analog output option installed

OPTIONS

Code Description
AWE-R 4 x form A relays (240V, 5A rated)
AWE-2 RS232 isolated serial output
AWE-4 RS485 isolated serial output
AWE-A Analog isolated source powered output (4-20mA, 1-5V)

AWE100P Load Cell Controller

The World’s Most User-Friendly And Versatile Load Cell Controller, Panel Mounted

Enquiry Form

We will get in touch with you shortly

Controller For High-Speed, High Accuracy Weighing and Level Measurement Operations.

The Load Cell offset and span trim calibration functions make this controller ideally suited for tank and silo applications. Relay and analog output options make it valuable for stand-alone control or as an interface for PLC applications.

Intuitive scrolling text menus guide you step by step through the effortless setup and calibration process, making the GS100P the world’s most user-friendly and versatile load-cell controller.

Input4/6-wire strain gauge 1-5mV/V
Power supplyHV – 85-265V AC/95-370V DC
LV – 15-48V AC/10-72V DC

Relay outputs

(Optional)

4 x 5A form A relays (250V rated)
Analog output (Optional)Isolated 16-bit 4-20mA/0-10V output (fully scaleable). Window
programmable over any range within the full-scale range of the controller.

Serial port

(Optional)

Isolated option 2 or option 4 serial port

» Modes: ASCII, Modbus RTU slave, Ranger A
 » Data ranges: 300-38400

»Parity: Odd, even or none

Excitation5V DC excitation supplied (powers up to 8 x 350Ω load-cells)
Sampling rateUp to 50Hz
Resolution18-bit
Accuracy0.005% of reading
Temperature driftTypically 3ppm/°C
CalibrationPre-calibrated for 0-10,000 counts (2mV/V sensor gain at full scale). Can be
recalibrated using the auto (apply mass) or mV/V method. Adjustable zero offset and span.
Easy setupIntuitive text prompts facilitate easy setup
SecurityCalibration and setpoint functions have independent security code access. Direct access to setpoint activation values is independently configurable.
InputsHold, lock, tare, zero, peak hold and print remote commands