Store Hours
Mon - Fri: 9:00 -17:30
Location
8 Heald Rd. Ingleburn, NSW 2565
7 Darnick St. Underwood QLD 4119
37 Barrie Rd. Tullamarine, VIC 3043
27 Rhur St. Dandenong Sth, VIC 3175
Mon - Fri: 9:00 -17:30
8 Heald Rd. Ingleburn, NSW 2565
7 Darnick St. Underwood QLD 4119
37 Barrie Rd. Tullamarine, VIC 3043
27 Rhur St. Dandenong Sth, VIC 3175
Home » Weighing Solutions » Digital Weight Indicators » Weigh Transmitters » AWE100P Load Cell Controller
Stand-Alone Control/Interface for PLC Applications. Ideal Solution For Tank & Silo Management.
We will get in touch with you shortly
Key Features:
Input | 4/6-wire strain gauge 1-5mV/V |
Power supply | HV - 85-265VAC / 95-370VDC LV - 15-48VAC / 10-72VDC |
Relay outputs (Optional) | 4 x 5A form A relays (250V rated) |
Analog output (Optional) | Isolated 16-bit 4-20mA / 0-10V 7Hz output (fully scalable). Windows programmable over any range within the full-scale range of the controller |
Serial port (Optional) | Isolated option 2 or option 4 serial port » Modes: ASCII, Modbus/RTU slave, Ranger A » Data ranges: 300-38400 » Parity: Odd, even or none |
Excitation | 5VDC excitation supplied (powers up to 8 x 350Ω load cells) |
Sampling rate | Up to 50Hz |
Resolution | 18-bit |
Accuracy | 0.005% of reading |
Temperature drift | Typically 3ppm/°C |
Calibration | Pre-calibrated for 0-10,000 counts (2mV/V sensor gain at full scale). Can be recalibrated using the auto (apply mass) or mV/V method. Adjustable zero offset and span |
Easy setup | Intuitive text prompts facilitate easy setup |
Security | Calibration and setpoint functions have independent security code access. Direct access to setpoint activation values is independently configurable |
Inputs | Hold, lock, tare, batch, zero, peak hold and print remote commands |
Display | 6-digit, 14-segment LED alphanumeric |
LEDs | 4 x setpoint, 1 x NET |
Buttons | 5 buttons: program, up, down and 2 menu buttons |
Dimensions | 48 x 96 x 119.5mm (H x W x D) |
Panel cutout | 45.5 x 92.5mm |
Code | Description |
AWE100 | AWE Series |
P | Panel mount |
-LV | 15-48VAC / 10-72VDC power supply |
-HV | 85-265VAC / 95-370VDC power supply |
-R | Relay outputs (2) form A |
-2 | RS232 isolated output |
-4 | RS485 isolated output |
-A | Analog output option installed |
Code | Description |
AWE-R | 4 x form A relays (240V, 5A rated) |
AWE-2 | RS232 isolated serial output |
AWE-4 | RS485 isolated serial output |
AWE-A | Analog isolated source powered output (4-20mA, 1-5V) |
Home » Weighing Solutions » Digital Weight Indicators » Weigh Transmitters » AWE100P Load Cell Controller
The World’s Most User-Friendly And Versatile Load Cell Controller, Panel Mounted
We will get in touch with you shortly
The Load Cell offset and span trim calibration functions make this controller ideally suited for tank and silo applications. Relay and analog output options make it valuable for stand-alone control or as an interface for PLC applications.
Intuitive scrolling text menus guide you step by step through the effortless setup and calibration process, making the GS100P the world’s most user-friendly and versatile load-cell controller.
Input | 4/6-wire strain gauge 1-5mV/V |
Power supply | HV – 85-265V AC/95-370V DC LV – 15-48V AC/10-72V DC |
Relay outputs (Optional) | 4 x 5A form A relays (250V rated) |
Analog output (Optional) | Isolated 16-bit 4-20mA/0-10V output (fully scaleable). Window programmable over any range within the full-scale range of the controller. |
Serial port (Optional) | Isolated option 2 or option 4 serial port » Modes: ASCII, Modbus RTU slave, Ranger A »Parity: Odd, even or none |
Excitation | 5V DC excitation supplied (powers up to 8 x 350Ω load-cells) |
Sampling rate | Up to 50Hz |
Resolution | 18-bit |
Accuracy | 0.005% of reading |
Temperature drift | Typically 3ppm/°C |
Calibration | Pre-calibrated for 0-10,000 counts (2mV/V sensor gain at full scale). Can be recalibrated using the auto (apply mass) or mV/V method. Adjustable zero offset and span. |
Easy setup | Intuitive text prompts facilitate easy setup |
Security | Calibration and setpoint functions have independent security code access. Direct access to setpoint activation values is independently configurable. |
Inputs | Hold, lock, tare, zero, peak hold and print remote commands |
Hotline:
1300 044 044