Test Weights

• Sized from 1mg to 10kg
• Suitable for calibration of both Analytical Balance (Class II) and Trade Scales (Class III)
• High Polish Finish
• Non Magnetic
• Class III Trade & Inspector Weights
• Custom weights available when driven over
• Easy for vehicles to load on and off

• O.I.M.L R111-2 to F Class (International)
• Regulation 13, Class II (Australian NMI)
• ASTM E617 Class 5 (USA)

• Weights to be verified every 3 years (REG 13)

• Capacity stamped on each mass
• Mass set boxes are marked with unique identifier
• Unique identifier for Individual Masses at extra cost

• Weight Kits come in foam lined carry case
• Loose weights come in individual cases

SMALL MASSES

• Sized from 100g to 20kg
• Box sets available
• Stackable design
• No burrs or rough edges
• Class III trade weights
• Custom weights available

ACCURACY CLASS

• O.I.M.L R111-2 to F Class (International)
• Regulation 13, Class II (Australian NMI)
• NIST 105-1 Class F (USA)

IDENTIFICATION

• Capacity is stamped on each mass
• Individual masses may be stamped with
  a unique identifier at additional cost

RE-CALIBRATION

• Weights to be verified every 3 years (REG 13)

SURFACE FINISH

• 1 Coat Zinc Primer
• Protect Line 402 (40uM)
  > Followed by 2 coats equipment gloss enamel
• Protect Line 304 (40uM per coat)
  > Minimum paint thickness 120 uM

• Stainless Steel Mass Set#1 1mg, 2 x 2mg, 5mg, 10mg, 2 x 20mg, 50mg, 100mg, 2 x 200mg, 500mg, 1g, 2 x 2g, 5g, 10g, 2 x 20g, 50g, 100g, 2 x 200g
• Stainless Steel Mass Set#2 Comprises of Set#1 plus 1kg and 2 x 2kg
• Stainless Steel Mass Set#3 Comprises of Set#2 plus 5kg and 10kg
• Stainless Steel Mass Set#4 Comprises of 1kg, 2 x 2kg and 5kg
• Cast Iron Mass Set#4 2 x 100g, 2 x 200g, 2 x 500g, 2 x 2kg, 2 x 5kg and 1 x 10kg
• Buy or hire stock available
• This is our standard kit but we are regularly asked to package different masses for clients

• Stackable interlocking design
• REG13, NATA or AWE certicate
• 250, 500, 1000, 2000 kg standard
• Class III trade & inspector weights
• Structurally certified lifting frames available
• O.I.M.L. R111-2 to M class (international)
• Regulation 13, Class III (Australian NMI)
• NIST 105-1 to Class F (USA)
• Weights verified every two years (REG 13)
• Each mass uniquely identified with raised numeral
• Weights and cradles comply with structural steel code AS4100

• Stackable interlocking design
• Delivered to your site
• Great hiring rates
• Purpose built test trucks with hiab and forklift capability
• 200 Tonnes of weigh available
• Class III trade & inspector weights
• Structurally certified lifting frames available
• O.I.M.L. R111-2 to M class (international)
• Regulation 13, Class III (Australian NMI)
• NIST 105-1 to Class F (USA)
• Weights and cradles comply with structural steel code AS4100
• Custom-made lifting frames if required