Phone Number

1300-044-044

Email

sales@awe.com.au

Store Hours

Mon - Fri: 9:00 -17:30

Location

8 Heald Rd. Ingleburn, NSW 2565
7 Darnick St. Underwood QLD 4119
27 Rhur St. Dandenong Sth, VIC 3175

Standard Test Weights

Certified Test Masses for Purchase or Hire.

Stainless Steel Test Masses: 1mg – 10kgHexagonal Test Masses: 100g – 2kgHand Grip Test Masses: 5kg – 20kgCast Iron Test Masses: 250kg – 2t

Range of slings, chains and lifting cradles also available.

STAINLESS STEEL TEST MASSES

  • Sized from 1mg to 10kg
  • Suitable for calibration of both Analytical Balance (Class II) and Trade Scales (Class III)
  • High Polish Finish
  • Non Magnetic
  • Class III Trade & Inspector Weights

ACCURACY CLASS

  • O.I.M.L R111-2 to F Class (International)
  • Regulation 13, Class II (Australian NMI)
  • ASTM E617 Class 5 (USA)

RE-CALIBRATION

  • Weights to be verified every 3 years (REG 13)

IDENTIFICATION

  • Capacity stamped on each mass
  • Mass set boxes are marked with unique identifier
  • Unique identifier for Individual Masses at extra cost

BOX SETS

  • Weight Kits come in foam lined carry case
  • Loose weights come in individual cases
 

SMALL MASSES

  • Sized from 100g to 20kg
  • Box sets available
  • Stackable design
  • No burrs or rough edges
  • Class III trade weights
  • Custom weights available

ACCURACY CLASS

  • O.I.M.L R111-2 to F Class (International)
  • Regulation 13, Class II (Australian NMI)
  • NIST 105-1 Class F (USA)

IDENTIFICATION

  • Capacity is stamped on each mass
  • Individual masses may be stamped with
    a unique identifier at additional cost

RE-CALIBRATION

  • Weights to be verified every 3 years (REG 13)

SURFACE FINISH

  • 1 Coat Zinc Primer
  • Protect Line 402 (40uM)
    > Followed by 2 coats equipment gloss enamel
  • Protect Line 304 (40uM per coat)
    > Minimum paint thickness 120 uM

Key Features

  • Stackable interlocking design
  • REG13, NATA or AWE certicate
  • 250, 500, 1000, 2000 kg standard
  • Class III trade & inspector weights
  • Structurally certified lifting frames available
  • O.I.M.L. R111-2 to M class (international)
  • Regulation 13, Class III (Australian NMI)
  • NIST 105-1 to Class F (USA)
  • Weights verified every two years (REG 13)
  • Each mass uniquely identified with raised numeral
  • Weights and cradles comply with structural steel code AS4100

Key Features

  • Stackable interlocking design
  • Delivered to your site
  • Great hiring rates
  • Purpose built test trucks with hiab and forklift capability
  • 200 Tonnes of weigh available
  • Class III trade & inspector weights
  • Structurally certified lifting frames available
  • O.I.M.L. R111-2 to M class (international)
  • Regulation 13, Class III (Australian NMI)
  • NIST 105-1 to Class F (USA)
  • Weights and cradles comply with structural steel code AS4100
  • Custom-made lifting frames if required

Key Features

  • Stainless Steel Mass Set#1
    1mg, 2 x 2mg, 5mg, 10mg, 2 x 20mg, 50mg, 100mg, 2 x 200mg, 500mg, 1g, 2 x 2g, 5g, 10g, 2 x 20g, 50g, 100g, 2 x 200g
  • Stainless Steel Mass Set#2
    Comprises of Set#1 plus 1kg and 2 x 2kg
  • Stainless Steel Mass Set#3
    Comprises of Set#2 plus 5kg and 10kg
  • Stainless Steel Mass Set#4
    Comprises of 1kg, 2 x 2kg and 5kg
  • Cast Iron Test Mass Set
    2 x 100g, 2 x 200g, 2 x 500g, 2 x 1kg, 2 x 2kg, 2 x 5kg & 1 x 10kg
  • Buy or hire stock available
  • This is our standard kit but we are regularly asked to package different masses for clients

Test Weights

Fully calibrated weights for purchase or hire

STAINLESS STEEL TEST MASSES

  • Sized from 1mg to 10kg
  • Suitable for calibration of both Analytical Balance (Class II) and Trade Scales (Class III)
  • High Polish Finish
  • Non Magnetic
  • Class III Trade & Inspector Weights
  • Custom weights available when driven over
  • Easy for vehicles to load on and off

ACCURACY CLASS

  • O.I.M.L R111-2 to F Class (International)
  • Regulation 13, Class II (Australian NMI)
  • ASTM E617 Class 5 (USA)

RE-CALIBRATION

  • Weights to be verified every 3 years (REG 13)

IDENTIFICATION

  • Capacity stamped on each mass
  • Mass set boxes are marked with unique identifier
  • Unique identifier for Individual Masses at extra cost

BOX SETS

  • Weight Kits come in foam lined carry case
  • Loose weights come in individual cases
 

SMALL MASSES

  • Sized from 100g to 20kg
  • Box sets available
  • Stackable design
  • No burrs or rough edges
  • Class III trade weights
  • Custom weights available

ACCURACY CLASS

  • O.I.M.L R111-2 to F Class (International)
  • Regulation 13, Class II (Australian NMI)
  • NIST 105-1 Class F (USA)

IDENTIFICATION

  • Capacity is stamped on each mass
  • Individual masses may be stamped with
    a unique identifier at additional cost

RE-CALIBRATION

  • Weights to be verified every 3 years (REG 13)

SURFACE FINISH

  • 1 Coat Zinc Primer
  • Protect Line 402 (40uM)
    > Followed by 2 coats equipment gloss enamel
  • Protect Line 304 (40uM per coat)
    > Minimum paint thickness 120 uM

Key Features

  • Stainless Steel Mass Set#1
    1mg, 2 x 2mg, 5mg, 10mg, 2 x 20mg, 50mg, 100mg, 2 x 200mg, 500mg, 1g, 2 x 2g, 5g, 10g, 2 x 20g, 50g, 100g, 2 x 200g
  • Stainless Steel Mass Set#2
    Comprises of Set#1 plus 1kg and 2 x 2kg
  • Stainless Steel Mass Set#3
    Comprises of Set#2 plus 5kg and 10kg
  • Stainless Steel Mass Set#4
    Comprises of 1kg, 2 x 2kg and 5kg
  • Cast Iron Mass Set#4
    2 x 100g, 2 x 200g, 2 x 500g, 2 x 2kg, 2 x 5kg and 1 x 10kg
  • Buy or hire stock available
  • This is our standard kit but we are regularly asked to package different masses for clients

Key Features

  • Stackable interlocking design
  • REG13, NATA or AWE certicate
  • 250, 500, 1000, 2000 kg standard
  • Class III trade & inspector weights
  • Structurally certified lifting frames available
  • O.I.M.L. R111-2 to M class (international)
  • Regulation 13, Class III (Australian NMI)
  • NIST 105-1 to Class F (USA)
  • Weights verified every two years (REG 13)
  • Each mass uniquely identified with raised numeral
  • Weights and cradles comply with structural steel code AS4100

Key Features

  • Stackable interlocking design
  • Delivered to your site
  • Great hiring rates
  • Purpose built test trucks with hiab and forklift capability
  • 200 Tonnes of weigh available
  • Class III trade & inspector weights
  • Structurally certified lifting frames available
  • O.I.M.L. R111-2 to M class (international)
  • Regulation 13, Class III (Australian NMI)
  • NIST 105-1 to Class F (USA)
  • Weights and cradles comply with structural steel code AS4100
  • Custom-made lifting frames if required

STAINLESS STEEL TEST MASSES

  • Sized from 1mg to 10kg
  • Suitable for calibration of both Analytical Balance (Class II) and Trade Scales (Class III)
  • High Polish Finish
  • Non Magnetic
  • Class III Trade & Inspector Weights
  • Custom weights available when driven over
  • Easy for vehicles to load on and off

ACCURACY CLASS

  • O.I.M.L R111-2 to F Class (International)
  • Regulation 13, Class II (Australian NMI)
  • ASTM E617 Class 5 (USA)

RE-CALIBRATION

  • Weights to be verified every 3 years (REG 13)

IDENTIFICATION

  • Capacity stamped on each mass
  • Mass set boxes are marked with unique identifier
  • Unique identifier for Individual Masses at extra cost

BOX SETS

  • Weight Kits come in foam lined carry case
  • Loose weights come in individual cases

SMALL MASSES

  • Sized from 100g to 20kg
  • Box sets available
  • Stackable design
  • No burrs or rough edges
  • Class III trade weights
  • Custom weights available

Accuracy Class

  • O.I.M.L R111-2 to F Class (International)
  • Regulation 13, Class II (Australian NMI)
  • NIST 105-1 Class F (USA)

Re-Calibration

  • Weights to be verified every 3 years (REG 13)

 

 

Key Features

  • Stainless Steel Mass Set#1
    1mg, 2 x 2mg, 5mg, 10mg, 2 x 20mg, 50mg, 100mg, 2 x 200mg, 500mg, 1g, 2 x 2g, 5g, 10g, 2 x 20g, 50g, 100g, 2 x 200g
  • Stainless Steel Mass Set#2
    Comprises of Set#1 plus 1kg and 2 x 2kg
  • Stainless Steel Mass Set#3
    Comprises of Set#2 plus 5kg and 10kg
  • Stainless Steel Mass Set#4
    Comprises of 1kg, 2 x 2kg and 5kg
  • Cast Iron Mass Set#4
    2 x 100g, 2 x 200g, 2 x 500g, 2 x 2kg, 2 x 5kg and 1 x 10kg
  • Buy or hire stock available
  • This is our standard kit but we are regularly asked to package different masses for clients

Key Features

  • Stackable interlocking design
  • REG13, NATA or AWE certicate
  • 250, 500, 1000, 2000 kg standard
  • Class III trade & inspector weights
  • Structurally certified lifting frames available
  • O.I.M.L. R111-2 to M class (international)
  • Regulation 13, Class III (Australian NMI)
  • NIST 105-1 to Class F (USA)
  • Weights verified every two years (REG 13)
  • Each mass uniquely identified with raised numeral
  • Weights and cradles comply with structural steel code AS4100

Key Features

  • Stackable interlocking design
  • Delivered to your site
  • Great hiring rates
  • Purpose built test trucks with hiab and forklift capability
  • 200 Tonnes of weigh available
  • Class III trade & inspector weights
  • Structurally certified lifting frames available
  • O.I.M.L. R111-2 to M class (international)
  • Regulation 13, Class III (Australian NMI)
  • NIST 105-1 to Class F (USA)
  • Weights and cradles comply with structural steel code AS4100
  • Custom-made lifting frames if required