Store Hours
Mon - Fri: 9:00 -17:30
Location
8 Heald Rd. Ingleburn, NSW 2565
7 Darnick St. Underwood QLD 4119
37 Barrie Rd. Tullamarine, VIC 3043
27 Rhur St. Dandenong Sth, VIC 3175
Mon - Fri: 9:00 -17:30
8 Heald Rd. Ingleburn, NSW 2565
7 Darnick St. Underwood QLD 4119
37 Barrie Rd. Tullamarine, VIC 3043
27 Rhur St. Dandenong Sth, VIC 3175
Home » Weighing Solutions » Load Cell » Pressure Transducer Load Cell
Ideal For Measuring Pressure
We will get in touch with you shortly
APT Pressure Transducer Load Cells are manufactured from high grade tool steel designed for the industrial sector of aerospace, oil and gas, automotive, off-road, automation and control, marine, alternative energy, military and defense and a host of heavy duty measurement weighing applications.
Key Features:
Any indoor or outdoor application requiring quality repeatable results.
Use in Chemical, Food, Beverage & Pharmaceutical Industries where industrial construction is essential.
Used in applications requiring the ultimate in accuracy.
Capacity | 1000psi – 10,000psi (custom design capacity available upon request) |
Safe Service Pressure | 100% CAPACITY |
Safe Overload | 120% CAPACITY |
Output Sensitivity | 1-2mV/V ±0.1% |
Repeatability | <0.03% of Full Scale |
Zero Balance | <2% of Full Scale |
Span Temperature Effect | <20 PPM/˚C |
Zero Temperature Effect | <20 PPM/˚C |
Compensated Range | -10˚ C to +50˚C |
Operating Range | -20˚ C to +60˚C |
Environmental Protection Rating | IP65 |
Material | Stainless Steel, Tool Steel (Standard) |
Sealing | Glue sealed & encased |
Input Resistance | 350 Ω +/- 10 Ohms |
Output Resistance | 350 Ω +/- 3 Ohms |
Insulation Resistance | >2,000MΩ |
Excitation (Recommended) | 5-volt DC to 15-volt DC |
Excitation (Maximum) | 20-volt DC |
Hydraulic Connecter | ¼” BSP Parralel Thread |
Cable Type | 5mm OD 4 core screened. Cable length 6 meters |
Note: Load cell variants available with longer leads, 1000ω gauging, imperial sizing and different capacities. |
APT1-SS-1000PSI | 1000PSI Stainless Steel APT Pressure Transducer Load Cell |
APT1-SS-2000PSI | 2000PSI Stainless Steel APT Pressure Transducer Load Cell |
APT1-SS-4000PSI | 4000PSI Stainless Steel APT Pressure Transducer Load Cell |
APT1-SS-6000PSI | 6000PSI Stainless Steel APT Pressure Transducer Load Cell |
APT1-SS-8000PSI | 8000PSI Stainless Steel APT Pressure Transducer Load Cell |
APT1-SS-10000PSI | 10000PSI Stainless Steel APT Pressure Transducer Load Cell |
APT-TABS-600 | Truck air bag system pressure sensor 1000 ohms 2mv/v 600 PSI |
Capacity | 1000psi – 10,000psi (custom design capacity available upon request) |
Safe Service Pressure | 100% CAPACITY |
Safe Overload | 120% CAPACITY |
Output Sensitivity | 1-2mV/V ±0.1% |
Repeatability | <0.03% of Full Scale |
Zero Balance | <2% of Full Scale |
Span Temperature Effect | <20 PPM/˚C |
Zero Temperature Effect | <20 PPM/˚C |
Compensated Range | -10˚ C to +50˚C |
Operating Range | -20˚ C to +60˚C |
Environmental Protection Rating | IP65 |
Material | Stainless Steel, Tool Steel (Standard) |
Sealing | Glue sealed & encased |
Input Resistance | 350 Ω +/- 10 Ohms |
Output Resistance | 350 Ω +/- 3 Ohms |
Insulation Resistance | >2,000MΩ |
Excitation (Recommended) | 5-volt DC to 15-volt DC |
Excitation (Maximum) | 20-volt DC |
Hydraulic Connecter | ¼” BSP Parralel Thread |
Cable Type | 5mm OD 4 core screened. Cable length 6 meters |
Note: Load cell variants available with longer leads, 1000ω gauging, imperial sizing and different capacities. |
Hotline:
1300 044 044