Store Hours

Mon - Fri: 9:00 -17:30

Location

8 Heald Rd. Ingleburn, NSW 2565
7 Darnick St. Underwood QLD 4119
37 Barrie Rd. Tullamarine, VIC 3043
27 Rhur St. Dandenong Sth, VIC 3175

Test Weights

Fully calibrated Test weights for purchase or hire

Enquiry Form

We will get in touch with you shortly

STAINLESS STEEL TEST MASSES
  • Sized from 1mg to 10kg
  • Suitable for calibration of both Analytical Balance (Class II) and Trade Scales (Class III)
  • High Polish Finish
  • Non Magnetic
  • Class III Trade & Inspector Weights
  • Custom weights available when driven over
  • Easy for vehicles to load on and off
ACCURACY CLASS
  • O.I.M.L R111-2 to F Class (International)
  • Regulation 13, Class II (Australian NMI)
  • ASTM E617 Class 5 (USA)
RE-CALIBRATION
  • Weights to be verified every 3 years (REG 13)
IDENTIFICATION
  • Capacity stamped on each mass
  • Mass set boxes are marked with unique identifier
  • Unique identifier for Individual Masses at extra cost
BOX SETS
  • Weight Kits come in foam lined carry case
  • Loose weights come in individual cases
 

SMALL MASSES

  • Sized from 100g to 20kg
  • Box sets available
  • Stackable design
  • No burrs or rough edges
  • Class III trade weights
  • Custom weights available

ACCURACY CLASS

  • O.I.M.L R111-2 to F Class (International)
  • Regulation 13, Class II (Australian NMI)
  • NIST 105-1 Class F (USA)

IDENTIFICATION

  • Capacity is stamped on each mass
  • Individual masses may be stamped with
    a unique identifier at additional cost

RE-CALIBRATION

  • Weights to be verified every 3 years (REG 13)

SURFACE FINISH

  • 1 Coat Zinc Primer
  • Protect Line 402 (40uM)
    > Followed by 2 coats equipment gloss enamel
  • Protect Line 304 (40uM per coat)
    > Minimum paint thickness 120 uM

Key Features

  • Stainless Steel Mass Set#1
    1mg, 2 x 2mg, 5mg, 10mg, 2 x 20mg, 50mg, 100mg, 2 x 200mg, 500mg, 1g, 2 x 2g, 5g, 10g, 2 x 20g, 50g, 100g, 2 x 200g
  • Stainless Steel Mass Set#2
    Comprises of Set#1 plus 1kg and 2 x 2kg
  • Stainless Steel Mass Set#3
    Comprises of Set#2 plus 5kg and 10kg
  • Stainless Steel Mass Set#4
    Comprises of 1kg, 2 x 2kg and 5kg
  • Cast Iron Mass Set#4
    2 x 100g, 2 x 200g, 2 x 500g, 2 x 2kg, 2 x 5kg and 1 x 10kg
  • Buy or hire stock available
  • This is our standard kit but we are regularly asked to package different masses for clients

Key Features

  • Stackable interlocking design
  • REG13 & AWE certicate
  • 250, 500, 1000, 2000 kg standard
  • Class III trade & inspector weights
  • Structurally certified lifting frames available
  • O.I.M.L. R111-2 to M class (international)
  • Regulation 13, Class III (Australian NMI)
  • NIST 105-1 to Class F (USA)
  • Weights verified every two years (REG 13)
  • Each mass uniquely identified with raised numeral
  • Weights and cradles comply with structural steel code AS4100

Key Features

  • Stackable interlocking design
  • Delivered to your site
  • Great hiring rates
  • Purpose built test trucks with hiab and forklift capability
  • 200 Tonnes of weigh available
  • Class III trade & inspector weights
  • Structurally certified lifting frames available
  • O.I.M.L. R111-2 to M class (international)
  • Regulation 13, Class III (Australian NMI)
  • NIST 105-1 to Class F (USA)
  • Weights and cradles comply with structural steel code AS4100
  • Custom-made lifting frames if required

Test Weights

Fully calibrated weights for purchase or hire

Enquiry Form

We will get in touch with you shortly

Download Brochure

STAINLESS STEEL TEST MASSES

  • Sized from 1mg to 10kg
  • Suitable for calibration of both Analytical Balance (Class II) and Trade Scales (Class III)
  • High Polish Finish
  • Non Magnetic
  • Class III Trade & Inspector Weights
  • Custom weights available when driven over
  • Easy for vehicles to load on and off

ACCURACY CLASS

  • O.I.M.L R111-2 to F Class (International)
  • Regulation 13, Class II (Australian NMI)
  • ASTM E617 Class 5 (USA)

RE-CALIBRATION

  • Weights to be verified every 3 years (REG 13)

IDENTIFICATION

  • Capacity stamped on each mass
  • Mass set boxes are marked with unique identifier
  • Unique identifier for Individual Masses at extra cost

BOX SETS

  • Weight Kits come in foam lined carry case
  • Loose weights come in individual cases
 

SMALL MASSES

  • Sized from 100g to 20kg
  • Box sets available
  • Stackable design
  • No burrs or rough edges
  • Class III trade weights
  • Custom weights available

ACCURACY CLASS

  • O.I.M.L R111-2 to F Class (International)
  • Regulation 13, Class II (Australian NMI)
  • NIST 105-1 Class F (USA)

IDENTIFICATION

  • Capacity is stamped on each mass
  • Individual masses may be stamped with
    a unique identifier at additional cost

RE-CALIBRATION

  • Weights to be verified every 3 years (REG 13)

SURFACE FINISH

  • 1 Coat Zinc Primer
  • Protect Line 402 (40uM)
    > Followed by 2 coats equipment gloss enamel
  • Protect Line 304 (40uM per coat)
    > Minimum paint thickness 120 uM

Key Features

  • Stainless Steel Mass Set#1
    1mg, 2 x 2mg, 5mg, 10mg, 2 x 20mg, 50mg, 100mg, 2 x 200mg, 500mg, 1g, 2 x 2g, 5g, 10g, 2 x 20g, 50g, 100g, 2 x 200g
  • Stainless Steel Mass Set#2
    Comprises of Set#1 plus 1kg and 2 x 2kg
  • Stainless Steel Mass Set#3
    Comprises of Set#2 plus 5kg and 10kg
  • Stainless Steel Mass Set#4
    Comprises of 1kg, 2 x 2kg and 5kg
  • Cast Iron Mass Set#4
    2 x 100g, 2 x 200g, 2 x 500g, 2 x 2kg, 2 x 5kg and 1 x 10kg
  • Buy or hire stock available
  • This is our standard kit but we are regularly asked to package different masses for clients

Key Features

  • Stackable interlocking design
  • REG13, NATA or AWE certicate
  • 250, 500, 1000, 2000 kg standard
  • Class III trade & inspector weights
  • Structurally certified lifting frames available
  • O.I.M.L. R111-2 to M class (international)
  • Regulation 13, Class III (Australian NMI)
  • NIST 105-1 to Class F (USA)
  • Weights verified every two years (REG 13)
  • Each mass uniquely identified with raised numeral
  • Weights and cradles comply with structural steel code AS4100

Key Features

  • Stackable interlocking design
  • Delivered to your site
  • Great hiring rates
  • Purpose built test trucks with hiab and forklift capability
  • 200 Tonnes of weigh available
  • Class III trade & inspector weights
  • Structurally certified lifting frames available
  • O.I.M.L. R111-2 to M class (international)
  • Regulation 13, Class III (Australian NMI)
  • NIST 105-1 to Class F (USA)
  • Weights and cradles comply with structural steel code AS4100
  • Custom-made lifting frames if required

STAINLESS STEEL TEST MASSES

  • Sized from 1mg to 10kg
  • Suitable for calibration of both Analytical Balance (Class II) and Trade Scales (Class III)
  • High Polish Finish
  • Non Magnetic
  • Class III Trade & Inspector Weights
  • Custom weights available when driven over
  • Easy for vehicles to load on and off

ACCURACY CLASS

  • O.I.M.L R111-2 to F Class (International)
  • Regulation 13, Class II (Australian NMI)
  • ASTM E617 Class 5 (USA)

RE-CALIBRATION

  • Weights to be verified every 3 years (REG 13)

IDENTIFICATION

  • Capacity stamped on each mass
  • Mass set boxes are marked with unique identifier
  • Unique identifier for Individual Masses at extra cost

BOX SETS

  • Weight Kits come in foam lined carry case
  • Loose weights come in individual cases

SMALL MASSES

  • Sized from 100g to 20kg
  • Box sets available
  • Stackable design
  • No burrs or rough edges
  • Class III trade weights
  • Custom weights available

Accuracy Class

  • O.I.M.L R111-2 to F Class (International)
  • Regulation 13, Class II (Australian NMI)
  • NIST 105-1 Class F (USA)

Re-Calibration

  • Weights to be verified every 3 years (REG 13)

 

 

Key Features

  • Stainless Steel Mass Set#1
    1mg, 2 x 2mg, 5mg, 10mg, 2 x 20mg, 50mg, 100mg, 2 x 200mg, 500mg, 1g, 2 x 2g, 5g, 10g, 2 x 20g, 50g, 100g, 2 x 200g
  • Stainless Steel Mass Set#2
    Comprises of Set#1 plus 1kg and 2 x 2kg
  • Stainless Steel Mass Set#3
    Comprises of Set#2 plus 5kg and 10kg
  • Stainless Steel Mass Set#4
    Comprises of 1kg, 2 x 2kg and 5kg
  • Cast Iron Mass Set#4
    2 x 100g, 2 x 200g, 2 x 500g, 2 x 2kg, 2 x 5kg and 1 x 10kg
  • Buy or hire stock available
  • This is our standard kit but we are regularly asked to package different masses for clients

Key Features

  • Stackable interlocking design
  • REG13, NATA or AWE certicate
  • 250, 500, 1000, 2000 kg standard
  • Class III trade & inspector weights
  • Structurally certified lifting frames available
  • O.I.M.L. R111-2 to M class (international)
  • Regulation 13, Class III (Australian NMI)
  • NIST 105-1 to Class F (USA)
  • Weights verified every two years (REG 13)
  • Each mass uniquely identified with raised numeral
  • Weights and cradles comply with structural steel code AS4100

Key Features

  • Stackable interlocking design
  • Delivered to your site
  • Great hiring rates
  • Purpose built test trucks with hiab and forklift capability
  • 200 Tonnes of weigh available
  • Class III trade & inspector weights
  • Structurally certified lifting frames available
  • O.I.M.L. R111-2 to M class (international)
  • Regulation 13, Class III (Australian NMI)
  • NIST 105-1 to Class F (USA)
  • Weights and cradles comply with structural steel code AS4100
  • Custom-made lifting frames if required